Senior Instrumentation &Control Engineer_AKSAI_5x2

Responsibilities:

  • In order to execute the assigned duties Senior Instrumentation &Control Engineer is obliged to: To design or check the design of the projects for the section of his/her competence on the base of scientific and technical hi-tech, local and foreign experience in design, construction and use of computer-aided design facilities.
  • To perform or check technical activities such as including instrument calculation (i.e. Control valve sizing, Safety valve sizing, instrument sizing).
  • To be capable to select the proper technology to implement in the field of automation, instrumentation and telecommunication.
  • Definition of discipline Scope of Work for every phase of the Project in compliance with Client requirements and objectives.
  • To take part in preparing of technical assignment.
  • To take part in data collection of design, solve any technical problems during design, commissioning and plant development.
  • To take part in design review/HAZOP/HAZID with Client to verify the proposed design.
  • To make match the instrument design with the one proposed by other disciplines and coordinates with them such that the final product is correct.
  • To attend and co-ordinate with other disciplines and review other discipline deliverables (e.g. plot plans review, specification for Package, P&IDs mechanization).
  • To bring design projects and technical documentation to conformity with norms, technical specifications, other normative documents for design and construction and with technical assignments.
  • To bring the previous experience in the project development and during the construction or start-up.
  • To take part in seminars and conferences.
  • To coordinate the resources assigned and teach them technical knowledge and the use of the Company tools.
  • To identify the need of personnel on the basis of project requirements and work loads and report it to Lead Instrument Engineer.
  • to prepare all instrumentation and F&G engineering deliverables such as design basis, specification, data sheets, instrument index, I/O schedule, logic diagram, cable / JB schedule, etc. Instrument Datasheets, Index and I/O list shall be prepared using SPI (INTOOLS) software.
  • to carryout sizing calculations for control valves, safety valves and flow elements, accumulator sizing calculations, Instrument cable voltage drop & Intrinsically Safe circuit calculations
  • to prepare Safety Requirement Specifications, SIL verification calculations, Fire Detection & Alarm System deliverables.
  • to prepare Telecommunication Engineering deliverables such as Design Basis, Specifications for various telecommunication systems and fibre optic cables, system block diagrams, datasheets, etc.
  • to develop control system and telecommunication systems architecture
  • to provide inputs and review detailed drawings such as 3D model, location plans, cable routing layout, instrument/device installation, process / pneumatic hook-up, interconnection diagram, loop diagram, segment diagrams, wiring diagram, etc. prepared by instrument designers.
  • To supervise and guide instrument engineers and designers in preparing project deliverables, maintain change request, carryout manhour estimation and recruitment personnel if required.
  • To carryout site survey as required.
  • To attend meetings with client / vendor and clarify their queries as applicable.
  • To review various Instruments / Control system / Telecommunication system vendors offer, prepare technical clarification and prepare Technical Bid Evaluation report.
  • To review and provide comments on various instruments / control system / mechanical package vendor deliverables.
  • Contribute to the elaboration of an equipment list of concern;
  • Elaborate ESD-PSD block diagrams, cause and effect diagrams, technical and functional specifications of systems, control narrative, logistic schemes and loop diagrams;
  • Execute detail and instrumentation plant activities of bridge layout elaboration, instruments’ positioning, control room layout, typical installations, elaboration of various lists, MTO and terminal board schemes details;
  • Assist in the definition of operating manuals in instrumentation and control matters;
  • Define Architecture of systems;
  • Elaborate layout of automation equipments, control rooms, local control room;
  • If in charge like Project Instrumentation and Control Specialist Lead:
  • Participate in working up of assignments, tasks for developing of project decisions.
  • Participate in collecting of basic data for project, in solving of technical questions on assigned facilities, objects during all period of construction project, putting into operation of the object and opening up of designed capacity.
  • Coordinate the decisions made with project, design decisions on other sections (parts) of the project.
  • Provide compliance of the projects developed and technical documentation with standards, technical conditions and other normative documents on project, design and construction as well as with work request on them.
  • Control the progress of work, compliance of scopes, terms and quality of design works on Instrumentation and Control project work with the project standards,
  • Study and analyse the information, technical data indications and results of work, integrate and organize them
  • define with other disciplines the scope of work on designing, list of input documents and the other data, required for qualitative and timely execution of design project works.
  • Ensure timely introduction of modifications and additions into designs in accordance with resolutions of expert and approving authorities.
  • Participate in the resolution of issues about introduction of modifications into designs due to the introduction of more progressive technological processes, planning and constructive solutions providing the reduction of costs and improving technical-economical indications of construction and reconstruction objects.
  • Participate in the revision and coordination of design modifications arising during the construction process, to resolve issues if required on substitution of materials, items, constructions (definition of equipment dimensions in accordance with international standards).
  • Perform special work related tasks of his line-manager.
  • Contribute to the elaboration of instrumentation and control equipment;
  • Provide specialized technical assistance when required during the phases of detail engineering, procurement, construction and set up

Requirements:

  • Higher professional education with a work experience in projects organizations not less than 7 years.
  • Language Skills: English — upper-intermediate
  • Good working knowledge of Autocad , Microsoft Office, Software Valve Sizing
  • Proved experience in Well Hook-up

We offer:

  • Tengiz, 28×28
  • Accommodation, food, transportation
  • Medical insurance

Candidates with relevant experience are welcome send CVs tor.darya@career-holdings.kz indicating subject in line position applying for.

Добавить комментарий

Этот сайт использует Akismet для борьбы со спамом. Узнайте как обрабатываются ваши данные комментариев.